Medical Cable Harness RFQ: What to Send and What a Supplier Can Actually Claim
By CPENT Technical Team · Updated
A medical cable harness RFQ should contain seven things: the drawing or a sample, the pinout, the connector part numbers, the cable construction, the electrical and mechanical requirements, the documentation you need, and the quantity per revision. Ask the supplier which quality system they are certified to, and read the certificate scope: ISO 9001 covers manufacturing process control, while ISO 13485 is a separate medical-device quality system that a cable supplier may or may not hold. CPENT is certified to ISO 9001 and builds harnesses to drawing; crimp pull-force records and continuity testing are available per the inspection plan agreed for the project. We do not claim ISO 13485 unless a certificate is provided.
The seven items in a complete RFQ
| Item | What to send | Why it matters |
|---|---|---|
| Drawing or sample | A dimensioned drawing (PDF/DWG) or a physical sample with the revision marked | Without a revision, the first article cannot be approved against anything |
| Pinout | Connector pin number to wire colour/function, including unused pins | Wiring errors are among the most common harness defects |
| Connectors | Manufacturer and part number, or an approved equivalent list | Substituting a connector changes mating, current rating and sometimes certification |
| Cable | Construction (conductor size, cores, shielding), insulation material, jacket colour, outer diameter range | Jacket and insulation choice decides flexibility, temperature and flammability performance |
| Electrical and mechanical | Continuity, hipot voltage, insulation resistance, crimp pull-force, bend radius, expected mating cycles | These become the inspection plan and the acceptance criteria |
| Documentation | Whether you need first-article report, crimp records, material declarations (RoHS/REACH), traceability by batch | Documentation is quoted separately; deciding late delays the order |
| Quantity and revisions | Prototype, pilot and production quantities, and how revisions are controlled | Tooling and fixture cost depends on volume; revision control prevents wrong builds |
Reading a quality-system claim
ISO 9001 certifies how a factory controls its process. ISO 13485 is the quality system standard for medical devices; a cable assembly supplier may hold it, but many harness makers do not. If a medical device customer requires ISO 13485, ask for the certificate and check that the scope covers cable assembly, not only device manufacturing. CPENT holds ISO 9001:2015 (certificate 51326Q05266R053) and does not claim ISO 13485; when a project requires it, we say so before the sample stage rather than after.
Documents to ask for with the first article
- First-article inspection report against the drawing dimensions
- Crimp pull-force record for each terminal type and wire size
- Continuity and hipot test results, per the inspection plan agreed for the project (100% continuity is our standard process; hipot sampling is agreed per order)
- Material declarations for insulation, jacket and any adhesive or potting
- Traceability: batch or date code on the label, linked to the inspection records
Points to check before the first article
- Pinout given as a photo instead of a numbered table
- Connector part number missing the plating or keying suffix
- Cable outer diameter range not specified, so the strain relief does not grip
- No decision on whether unused pins are cut, capped or left open
- Label content and placement not specified, so traceability cannot be applied
Send your drawing and pinout and we will reply with the manufacturability points, tooling cost if any, MOQ and lead time. See also the custom harness range.
This guide is a buyer summary, not regulatory advice. Requirements depend on the device classification and the market; confirm with your quality and regulatory team.
Standards & official references
- IEC — International Electrotechnical Commission
- EU Low Voltage Directive 2014/35/EU (EUR-Lex)
- VDE — German electrical engineering association
- UL Solutions — product safety certification
More guides
- Plug Types, Voltage & Frequency by Country
- IEC 60320 Connector Types Explained: C5, C7, C13, C14, C15, C19, C20
- Power Cord Cable Codes Explained: H05VV-F, 60227 IEC 53, SJT, SVT, VCTF
- Micro-Inverter & Solar AC Connectors: C20 vs C28 vs M25 vs Q28
- Which Safety Approval Does a Power Cord Need? Certification by Country
- How to Check a Power Cord Certificate: Model, Scope, Holder, Validity
- Which Connector for Energy Storage and Micro-Inverters? Match the System Position First
- China GB Power Cords: How to Specify CCC, Cable Size, Length and Connector